MIT2
The table rotates. A standardized table with a diameter of 500 mm - 1,200 mm can be laid out as a pool yard of the assembly line.
![Products img](../../common/images/products/mit2/detail_img.png)
Overview
Product appearance
![appearance](../../common/images/products/mit2/img_01.jpg)
![appearance](../../common/images/products/mit2/img_02.jpg)
Key to model number designations
Specifications
![Specifications](../../common/images/products/mit2/img_04.png)
![Specifications](../../common/images/products/mit2/img_04L.png)
Note:
1) *1 90 W can be fitted upon request.
2) *2 If the table diameter is 1,000mm, the actual table diameter will be 994 mm.
Transport weight
Transport weight: 20 kg/unit Avoid concentrated loads.
Power supplies and speeds
![Power supplies and speeds](../../common/images/products/mit2/img_05.png?202406)
![Power supplies and speeds](../../common/images/products/mit2/img_05.png?202406)
Note:
(1) Actual speeds may vary by up to 10% less than the values shown, depending on the motor characteristics and payload.
(2) Variable-speed models should only be used within the specified speed range since low-speed operation may cause motor burnout.